Product Information

JPシリーズ5

  • 基本情報
  • ラインナップ一覧
  • 主な仕様

How to Read the Model Name

(1) (2) (3)
Type Pressing Capacity Specs
Press Unit U 0.5kN 0055 Standard -
Standard Controller B 1kN 0105 Long Stroke Type L
Compact Controller C 2kN 0205 Clean Room Compatible C
  5kN 0505  
10kN 1005
20kN 2005
30kN 3005
50kN 5005
80kN 8005
  JPU-0055 JPU-0105 JPU-
0205
JPU-0505 JPU-1005 JPU-
2005
JPU-3005 JPU-5005 JPU-
8005
Maximum Pressing Capacity (kN) 0.5 1 2 5 10 20 30 50 80
Ram Stroke (mm) 80 100 200
Maximum Speed (mm/sec)*1 414 280 320 250
Position Repeatability(mm)*2 ±0.005
Press Unit Dimensions
WxDxH (mm)*3
116x218x425 146x258x502 171x384x706 230x474x775 260x477x797
Weight (kg) 17 34 80 161 167 170
Standard Controller*4 Dimensions
WxDxH (mm)*3
350x310x163 350x310x163 428x338x175 514x365x283
Weight (kg) 11 11 13 21
Compact Controller Dimensions
WxDxH (mm)*3
140x280x292 140x280x292 140x280x292 160x280x287
Weight (kg) 5.8 6.4 7.5 9.0
External Regenerative Resistance*5 Dimensions
WxDxH (mm)*3
- 275x150x46 100x335x150 120x210x350
Weight (kg) - 1.1 2.9 5.6

*1 Maximum speed may vary depending upon conditions.
*2 Position repeatability is not a guarantee of absolute position precision.
*3 Excluding cables and protrusions.
*4 Regenerative Resistance is optional for JPU-0505・JPU-1005; it is standard for JPU-2005 and above.
*5 With the Compact Controller, the Regenerative Resistance is an external add-on.

  • These values are for standard models and may differ with specification modifications.
    For more information, please visit our Catalog & Diagram Download Page or contact us directly.
  • When configuring your facility for use with this product, be sure to perform your own risk assessment.

Common Specifications

Pressing Modes
Constant Speed PressingPosition Stop
Distance Stop
Load Stop
Increased Load Stop
Differential Load Stop
Event Stop
Stop at Reduced Load
Constant Load PressingTime Stop
Position Stop
Distance Stop
Event Stop

Combine multiple pressing steps.

Sensor Modes Step Sensors
Position Sensor Judg.Step Start Position
Position Sensor Judg.Step End Position
Load SensorPosition Sensor
Distance Sensor
Distance at End of Step
Peak Load SensorPosition Sensor
Distance Sensor
Bottom Load SensorPosition Sensor
Distance Sensor
Top Load SensorPosition Sensor
Distance Sensor
Valley Load SensorPosition Sensor
Distance Sensor
Peak to Peak Load SensorPosition Sensor
Distance Sensor
Differential Load SensorPosition Sensor
Distance Sensor
Differential Position SensorPosition Sensor
Differential Distance SensorDistance Sensor
Distance SensorDistance from Step End Position
Load Path SensorPosition Sensor
Distance Sensor
Load Zone Sensors
Load Sensor Zone 1
Zone 2
Zone 3
Zone 32
Sensor judgment applicable to the whole program
Set up to 32 zones (position ranges).
Program Sensors
Register Difference Sensor
Register Sum Sensor
Register Value Sensor
Sensor judgment made when all steps are finished.
No. of Programs*3 Up to 512
Number of Pressing Steps*3 Up to 512 (in one program)
No. of Step Sensors*3 Up to 16 (in one step), Up to 512 (in one program)
Encoder Incremental Type, Absolute Type*4(available as an option at time of order)
Display Units Load unit: N, kgf, Lb  Length unit: mm, inch
Display Languages PC Software English, Japanese, Korean, Simplified Chinese
Teaching Pendant English, Japanese, Korean, Simplified Chinese
Drive and Control Method AC servomotor drive 32 bit CPU (dual core)
External Input/Output COM RS-232C 1ch
I/O-SYS 17 Inputs / 16 Outputs (Please choose NPN or PNP specifications when you place your order. Optional internal power supply available for the standard controller.)
LAN Ethernet: 10BASE-T/100BASE-TX
MEMORY Port For USB Memory Connection
・ Backup model setting data and teaching data
・ Save result data
・ Upgrade system software
Field Network
(optional)
CC-LINK, DeviceNet, PROFIBUS, CANopen, PROFINET, Ethernet/IP
Choose your preferred Fieldbus when you place your order.
Power Supply Voltage Drive Power Supply Three Phase ・ Single Phase AC200~240V ±10%
Control Power Supply DC24V (With the compact controller, this must be supplied extenally.)
Work Environment Surrounding Temperature 0~40℃
Relative Humidity 20~90%(without condensation)
Elevation Up to 1,000m
Ingress Protection Rating Press Unit: IP40
Controller: IP20

*3The number of programs, pressing steps and step judgments is limited in relation to the total memory size. When multiple steps are included in one program, this in turn limits the number of new programs which can be added to the memory.
*4Please contact us for available models.

  • Specifications may be modified without prior notice.

Standard Attachments

  • I/O-S Short Connector
  • I/O-SYS Connector
  • Teaching Pendant Short Connector
  • SWBOX Short Connector (cable not included)
  • Press Unit Connector Cables (length 3m)
  • Operation Manual (CD-ROM)
  • Dedicated PC Software: JP5 Designer (Windows® 7, Windows® 8.1, Windows® 10)*5

*5 In order to operate the JP TaSⅡ System with an HMI (touch panel PC), make sure to use the Microsoft Windows® Embedded Standard 7 “WS7P” Windows Touch package license.

Options

  • Teaching Pendant (cord length: 3m, 5m)
  • Dedicated PC Software: JP5 Sampler, JP5 Reporter (Windows® 7, Windows® 8.1, Windows® 10)*6
  • Regenerative Resistance (Options for the JPU-0505/1005 at time of order)
  • I/O-SYS Cable (cord length: 2m, 3m, 5m)
  • Press Unit Connector Cables (cord length: 5m, 10m、15m、20m)
  • Load Cell Output
  • Encoder Output
  • Analog Monitor Output
  • Maintenance Box (cord length: 3m, 5m)

Maintenance Box

*6 In order to operate the JP TaSⅡ System with an HMI (touch panel PC), make sure to use the Microsoft Windows® Embedded Standard 7 “WS7P” Windows Touch package license.

Catalog Diagram Download Contact Us