Product Information

JP-S Series

  • Basic Information
  • Product Lineup
  • Main Specifications
Model (Pressing Capacity) Ram Stroke(mm) Clean Room Version Special Configuration 1*1
(High Power Motor Specification)
JP-S0501 (5kN) 100 -
150
250
350
JP-S1001 (10kN) 100
250
150 -
JP-S1501 (15kN) 100 -
200
350
400
300 -
450
JP-S2001 (20kN) 100
200
350
400
300 -
JP-S3001 (30kN) 100 -
200
300
350
400
JP-S5R01 (50kN) 100 - -
200
300
350
400
JP-S10R1 (100kN) 200 - -
400
JP-S20T1 (200kN) 200 - -
400

*1 Special Configuration 1: High Power Motor Specification (equipped with a motor one size larger than standard;
JP-S3001 is CE specification type only)
*The high power motor specification is intended for extending the ram holding time under certain conditions. It does not increase the maximum pressing capacity. The ram speed, power consumption, etc. for these types differs from the standard types. Please contact us for more information.

品版の見方

(1)Device Type (2)Max. Load (3)Specifications (4)Variations (5)Stroke
Main Unit: JP-S
Controller: JP-SC
5kN: 0501
10kN: 1001
15kN: 1501
20kN: 2001
30kN: 3001
50kN: 5R01
100kN: 10R1
200kN: 20T1
Standard: 0
CE: 1
Clean Room Type: 2
Standard: 0
Special 1: 1*1
JP-S0501
 100mm:100
 150mm:150
 250mm:250
 350mm:350
JP-S1001
 100mm:100
 150mm:150
 250mm:250
JP-S1501
 100mm:100
 200mm:200
 300mm:300
 350mm:350
 400mm:400
 450mm:450
JP-S2001
 100mm:100
 200mm:200
 300mm:300
 350mm:350
 400mm:400
JP-S3001
 100mm:100
 200mm:200
 300mm:300
 350mm:350
 400mm:400
JP-S5R01
 100mm:100
 200mm:200
 300mm:300
 350mm:350
 400mm:400
JP-S10R1
 200mm:200
 400mm:400
JP-S20T1
 200mm:200
 400mm:400
(6)Brake (7)Load Cell (8)DIO (9)Linear Encoder Input
Included: B
None: 0
Pressing Spec: S
Pulling Spec: L*2
None: 0
NPN: N
PNP: P
None: 0
Included: L*3
None: 0
(10)Fieldbus*4 (11)Regenerative Resistance*5 (12)Main Unit Cable*6*7 (13)Power Cable*8
CC-Link: CC
DeviceNet: DE
PROFIBUS: PR
CANopen: CO
PROFINET: PN
EtherNet/IP: EP
None: 00
External: A
Internal: B
3m: 3
5m: 5
10m: A
15m: B
20m: C
None: 0
3m: 3
5m: 5
10m: A
None: 0
(14)Power Source Specs      
5kN-20kN
 Single Phase: 1*9
 Three Phase: 3
30kN/50kN
 Three Phase: 3
     

*1 Special Configuration 1: High Power Motor Specification (equipped with a motor one size larger than standard) JP-S0501/1001/2001, JP-S3001(CE specification type only)
*2 Pulling specification types are available upon request. Please contact us for compatible models.
*3 Linear Encoder: under development
*4 CANopen is compatible with JP-S System Software Ver.4.8.0 and above. PROFINET is compatible with JP-S System Software Ver.6.2.1 and above. EtherNet/IP is compatible with JP-S System Software Ver.6.3.0 and above.
*5 Regenerative Resistance: with the JP-SC3001-11, 5R01, 10R1 and 20T1, only built-in is available.
*6 Main Unit Cables (set of 3): motor cable, encoder connector cable, sensor/load cell cable or sensor cable.
*7 Main Unit Cables: for cables longer than 20m or for robot cables, please contact us.
*8 Power Cables (set of 2): controller power cable, press unit drive power cable
*9 Power Supply Specs: JP-S2001 Special Configuration 1 type is three phase only.

Special Specifications Catalog Diagram Download Contact Us